Stanley Chisel Handle 750 Series Socket Bevel - Smaller Size - With Decal

Description

Up for your consideration is this Reproduction Handle for Stanley 750 Series Socket Bevel Chisels.
I believe Stanley used 3 different size handles... small, medium and large. This one is the smaller size. This means the taper part that fits into the socket of the chisel measures about 0.580 inches in diameter at the large end and about 0.345 inches in diameter at the small end. The length of the socket taper is about 1 inch.
If the opening on your chisel measures about 0.550" in diameter or smaller this handle should fit your chisel. The angle of the taper is the same that Stanley used.
This handle is the most accurate reproduction handle that is available for the 750 series of Stanley socket chisels.  It's the same size and shape as the original. It has the same degree of taper on the socket end. It's made from hickory the same as the original. It has 3 hard leather washers on the end like the original.
It is finished in tinted nitrocellulose lacquer just like the original handles were and it
has a screen printed water slide decal applied on top of the lacquer finish that is an accurate copy of the original
.
These handles are beautiful.
A limited amount are currently available but if there is enough demand I will produce more of them.  I also have the medium size available so if you need that size please see my other listings. I plan to produce some in the largest size later this summer... the size that will fit the largest sizes of Stanley socket chisels.
Please inspect the photographs closely. They provide important detail of this item and are part of the description of this item. Please ask questions if necessary.  Thanks for considering this item.