-40%

Portable Hand-held Digital Ultrasonic Flaw Detector Defectoscope MultiColor LCD

$ 1530.64

Availability: 100 in stock
  • Condition: New
  • Restocking Fee: 15%
  • Return shipping will be paid by: Buyer
  • MPN: Does Not Apply
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Brand: QT

    Description

    New Portable Hand-held Digital Ultrasonic Flaw Detector
    New Portable Hand-held Digital Ultrasonic Flaw Detector
    FEATURES:
    This is a brand new 350B advanced digital hand-held ultrasonic flaw detector that has a multi-color
    TFT LCD and a host of new features to meet challenging inspection requirements. It combines powerful flaw detection and measurement capabilities, extensive data storage, and the ability to transfer detailed inspection data to the PC via its high-speed USB port.
    The instrument incorporates many advanced signal processing features including a 10MHz RF bandwidth to permit testing of thin materials, narrow band filters to improve the signal to noise in high gain applications, a spike pulser for applications requiring higher frequencies, and a tunable square wave pulse to optimize penetration on thick or highly attenuating materials.
    The instrument can be widely used in locating and sizing hidden cracks, voids, disbands, and similar discontinuities in welds, forgings, billets, axles, shafts, tanks and pressure vessels, turbines, and structural components.
    Display:
    Hi-resolution (320X240 pixels)multi color TFT LCD with 4 user-selectable brightness controls provides high contrast viewing of the waveform from bright, direct sunlight to complete darkness.
    The hi-resolution multicolor TFT LCD display with fast 60 Hz update gives an analog look to the waveform providing detailed information that is critical in many applications including nuclear power plant inspections.
    Range
    :
    Up to 6000 mm / 236in. in steel. Suitable for use on large work pieces and in high-resolution measurements.
    Pulser
    :
    Pulse Energy selectable among Low, Medium and High.
    Pulse Repetition Frequency adjustable from 10 Hz to 1 KHz in 1 Hz increments.
    Damping selectable among 100, 200 and 400 for optimum probe performance
    Test Modes include Pulse echo, dual and thru-transmission
    Receiver :
    Sampling:10 digit AD Converter at the sampling speed of 160 MHz
    Rectification:  Positive Halfwave, Negative Halfwave, Fullwave and RF
    Analog Bandwidth: 0.5MHz to 10MHz  capability with selectable frequency ranges (automatically set by the instrument) to match probe for optimum performance.
    Gain:0 dB to 110 dB adjustable in selectable steps 0.1 dB, 2 dB, 6 dB, and locked.
    Gates :
    Two fully independent gates offer a range of measurement options for signal height or distance using peak triggering.
    The echo-to-echo mode allows accurate gate positioning for signals which are extremely close together.
    Gate Start: Variable over entire displayed range
    Gate Width: Variable from Gate Start to end of displayed range
    Gate Height: Variable from 0 to 99% Full-Screen Height
    Alarms: Threshold positive/negative
    Memory
    :
    Memory of 100 channel files to store calibration set-ups
    A memory of 1000 wave files to store A-Scan patterns and instrument settings.
    All the files can be stored, recalled and cleared.
    Functions
    :
    Semiautomatic two point calibration:  Automated calibration of transducer zero offsets and/or material velocity
    Flaw Locating: Live display Sound-path, Projection (surface distance), Depth, Amplitude,
    Flaw sizing: Automatic flaw sizing using AVG/AVG or DAC, speeds reporting of defect acceptance or rejection.
    Digital Readout and Trig. Function:  Thickness/Depth can be displayed in digital readout when using a normal probe and Peak path, Surface Distance and Depth are directly displayed when angle probe is in use.
    Both the DAC and the AVG method of amplitude evaluation are available.
    Curved Surface Correction feature
    Crack Height Measure function
    Weld figure feature
    Magnify gate spreading of the gate range over the entire screen width
    Video Recording and play
    Auto-gain function
    Envelope: Simultaneous display of live A-scan at 60 Hz update rate and envelope of A-scan display
    Peak Hold: Compare frozen peak waveforms to live A-Scans to easily interpret test results.
    A Scan Freeze: Display freeze holds waveform and sound path data
    B Scan display feature
    Real Time Clock
    The instrument clock keeps running tracking the time.
    Communication
    High speed USB2.0 port. The DataPro software helps manage and format stored inspection data for high-speed transfer to the PC. Data can be printed or easily copied and pasted into word processing files and spreadsheets for further reporting needs. New features include live screen capture mode and database tracking.
    Battery
    Internal rechargeable Li-ion battery pack rated 7.2V at 8800 mAh
    8 hours nominal operating time depending on display brightness
    8-10 hours typical recharge time
    Knob
    Operating adjustments are easily and quickly made using the rotary knob.
    Specifications
    Range:
    0 to 6000 mm / 0-236 In., at steel velocity
    Material Velocity
    : 1000 to 9999m/s
    Display Delay
    : -20 to 3400 µs
    Probe Delay/Zero Offset
    : 0 to 99.99µs
    Sensitivity
    : 110 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB and locked.
    Test Modes
    : Pulse echo, dual element, and thru-transmission
    Pulse Repetition Frequency
    : ranges from 10 Hz to 1000 Hz
    Pulse Energy
    : Low, Medium and High spike pulse.
    Damping
    : 100, 200, 400 ohms
    Bandwidth (amplifier bandpass):
    0.5 to 10 MHz
    Gate Monitors
    : Two independent gates controllable over entire sweep range
    Rectification
    : Positive halfwave, negative halfwave, fullwave, RF
    System Linearity
    : Horizontal: +/-0.2% FSW, Vertical: 0.25% FSH, Amplifier
    Accuracy
    +/-1 dB.
    Reject (suppression):
    0 to 80% full screen height
    Units
    : Inch or millimeter
    Transducer Connections
    : BNC
    Power Requirements
    : AC Mains 100-240 VAC, 50-60 Hz
    Dimensions
    : 263HX170WX61D mm / 10.4X6.7X2.4 in.
    Operating Temperature
    : -10
    °
    C to 50
    °
    C / 14
    °
    F-122
    °
    F
    Storage Temperature
    : -30
    °
    C to 50
    °
    C /-22
    °
    F-122
    °
    F
    STANDARD ACCESSORIES
    :
    M
    ain Unit
    OPERATIONAL MANUAL
    CARRYING CASE
    Straight beam transducer (
    10mm/.4 in. 4MHz)
    Angle Beam transducer (8mmX9mm /.3X.35 in. 60
    °
    4MHz)
    interconnect cable for the TRANSDUCER (q9-q5)
    rechargeable Li-ion battery package, 8.8amp hour
    power charger
    supporting pillar 2 pcs.
    Datapro software cd
    USB cable
    SUMMARY OF POLICIES
    ABOUT BIDDING
    Please read thoroughly and carefully about our policies, bid or buy only if you agree with all the policies and pay. We try our best to describe and provide accurate specifications and pictures for the item, although the actual item might slightly different due to factory modification.
    WHY US
    Best Price
    because we bought directly from the factory, and we’re professionals serving you in the US.
    Prompt Shipment
    within
    one business day
    (most of the items will be shipped within the same day if we receive payment before 2 PM, Saturday shipping is available in most occasion) after we receive your cleared payment in the USA.
    Fast Delivery
    in USPS Priority Mail (2-3 days delivery to your address within 48 continental states in US) except Free Shipping Offer or others stated in the listing (We reserve the right to ship by USPS first class, Parcel Select, or other economic shipments). Want faster delivery or save shipping cost with cheaper ways, please
    E-mail
    us, we’ll do whatever to suit your need.
    30 days Return
    policy (details as below), Your satisfaction is our goal.
    INSURANCE
    Insurance is suggested for all the purchase and recommended for purchase over 0.00. We’ll not responsible for losing or damage or broken during shipping.
    PAYMENT
    We will accept Pay Pal in US Dollar within 3 days after bidding or buying, and We’ll not guarantee the availability of product if we do not receive payment within 3 days after bidding.  Please
    E-mail
    us for other payment terms. Non-Payment will be automatically reported to eBay in 5 days after the purchase, we’re not responsible for the consequence from this.
    SHIPMENT
    The shipping & handling fee (
    includes not only postage but also traveling to post office, packing relevant materials and others, please consider S&H fee into your total cost of the item you are interested
    ) is for shipping to 48 continental states in the US by USPS priority mail (2-3 days) unless otherwise stated; some other options are listed in the shipping for your reference. All the others please
    E-mail
    us to have more information.
    All of our transactions may be combined to save on shipping, please
    E-mail
    us for more information.
    All of the items normally will be shipped within the next business day upon cleared payment (We can’t control the actual delivery time after we hand over the package to the US postal office). We’re not responsible for undelivered or delayed package due to an incorrect address. We may ship directly from the foreign manufacturer if we ran out of stock locally; there will be no extra charge.
    RETURN & REFUND
    We accept refund or replacement of items of defective or different description within 30 days of purchase. The shipping & handling fee is NOT refundable. We’re only responsible for the shipping & handling fee with replacement. The item should be returned in original conditions as received.
    We offer replacement with same or similar items or refund with 15% restocking fee for the returned item within 30 days of purchase for non-defective items. The item should be returned in original conditions as received.
    The shipping & handling fee and insurance are NON-refundable in any cases
    (ACTUAL SHIPPING COST WILL BE DEDUCTED FROM THE REFUND WHEN THE ITEM WITH FREE SHIPPING OFFER)
    . And the buyer is responsible for cost incurred by returning the items. All items should be authorized before return. Item must be returned in new condition, as received with all accompanied accessories and literature, including the factory package, damaged or incomplete items will be refused and returned to the sender.
    FEEDBACK
    We’ll leave feedback after we receive feedback from our buyer. If you think we do not deserve a positive feedback, please
    E-mail
    us so that we’ll have an opportunity to correct it. We appreciate any email about the products and us from our buyer.
    CONTACT
    For any question, please feel free to
    E-mail
    us, we will be glad to answer any question you may have to ensure your satisfaction and understanding before and after the purchase.
    Thanks for your business and have a happy shopping
    J
    Track Page Views With
    Auctiva's FREE Counter