-40%

MGB Dashboard LED Lamp Light Socket Replacement Kit

$ 13.45

Availability: 100 in stock
  • Returns Accepted: ReturnsNotAccepted
  • Vintage Car Part: Yes
  • Condition: Refurbished MGB dash panel lamp socket with incandescent and LED bulbs along with two styles of connector sets
  • Warranty: No Warranty

    Description

    Is your MGB suffering from corroded, damaged or broken dashboard lamp sockets?  Is illumination of your switches, high beam, heater/defroster and fresh air control knobs so poor that they are difficult to see at night?  If so, then we have a direct replacement kit, using refurbished original MGB sockets and lamps, which
    may
    correct these problems.  These sockets will fit all of the bulb holders for the illuminated switch clips and heater/defroster control knobs installed on the MGB. The picture of the light switch with the brightest illumination is with the LED bulb installed.
    These sockets originated from an actual MGB harness and vary somewhat in their description and wire color code.  They all operate the same when installed and your kit may not resemble exactly what the picture indicates.  All kits come with the same number of items.
    Our replacement kit consists of the following items:
    1. One refurbished, cleaned and polished lamp socket with pre-stripped wires,
    2. One new incandescent bulb installed into the socket,
    3. One new, white-light LED bulb (Negative Ground Systems ONLY),
    4. Two sets of crimp-on bullet male and female connectors,
    5. One set of spring loaded quick-splice connectors.
    The items were selected to afford you with as many installation and illumination options as possible.
    Upon purchase of the kit, a detailed set of instructions will be included.
    Please make sure these will work with your MGB as there are NO RETURNS.