DIG3D.LP.M CNC 3D LOW profile digitizing touch probe (3axis) MAGNETIC CONNECTOR

Description

LOW PROFILE 3D touch probe with MAGNETIC CONNECTOR
(
digitizing probe
)
for your CNC router +
spare tip + M3 tip adapter
All sensors are on stock! Fast shipping, fast delivery!
Watch the short video presentation
If you are not sure about concrete variant or wiring to your motion control, just send me motion control type or a photo and I will let you know how to wire it and which type is suitable for you.
Main parameters:
tip diameter:
3mm
shaft diameter:
3mm (~1/8")
--- or ---
6mm
(~1/4")
shaft length:
24
mm
power:
5-12V
/DC
--- or ---
17-24V
/DC
please select according your cnc system
switch type:
NC
--- or ---
NO
NC -
normally closed. Output is active, when sensor is NOT triggered.
NO
- normally open. Output is active, when sensor is triggered.
output:
NPN
--- or ---
PNP
NPN
output is closed to GND, when output is active
PNP
output is powered from supply voltage, when output is active
Standard parameters are 6mm shaft dia, 5-12V power, NC - normally closed, NPN
If you need any other parameter combination, just mention it during ordering, or send me a message.
Spare tip + M3 tip adapter:
Wiring:
Brown:
power supply
Black:
output signal
Blue:
GND
Example of typical
wiring:
*this is only wiring example. Please check your motion board documentation for the details.
Package content:
-
1x DIG3DLP with magnetic interface, 6mm shaft
- 1x cable with magnetic connector
- 1x spare tip
- 1x M3 tip adapter
(tip is not included)
Documentation:
You will receive the link for download a datasteet and all scripts after an order.